Velocity Volts Charge Carrier for e-Moto

Stronger, Smarter & Proven eMoto Carrier & Transport

The Charge Carrier by Velocity Volts is their latest iteration of the strongest, most lightweight, modular hitch rack built specifically for electric dirt bikes and e-motos in the industry. This rack was not adapted from a traditional bicycle or motorcycle carrier. At just 22 pounds, one person can install it, load a Sur Ron, Talaria, E-Ride Pro, or other eMoto onto it, and be on the road in minutes. Rated for 400 lbs, it mounts to any 2 inch hitch receiver on a Class III, IV, or V setup. Class II works depending on your vehicle's tongue weight rating. 

Purpose-built from the ground up for e-motos. The Secure Anchor Bolt System locks your bike through the foot pegs for a stable hold, while 20 adjustable bracket positions across 3 included mounting brackets (2 leveling, 1 flat) fit the geometry of nearly any e-moto. An industry-first kickstand sensor solution helps confirm your bike is loaded securely before you pull away. Smart Storage Mode folds the carrier vertically so it can stay installed on your hitch between rides, or split it into two pieces, no tools required, for easy storage in a garage or truck bed.

Expandable to a double carrier with the Charge Carrier Add-On for riders hauling two bikes. Every Charge Carrier is engineered and manufactured in Arizona, backed by a lifetime warranty, and ships with a 2 inch steel hitch pin and a 3.5 ft ratchet strap in the box. The strongest, lightest, and smartest e-moto hitch carrier on the road.

Important note: The Charge Carrier is rated for up to 400 lbs, but that's a ceiling, not a guarantee. Your vehicle's hitch has its own maximum tongue weight rating, and that number wins if it's lower. Check your owner's manual before loading up: if your tongue weight rating is 250 lbs, that's your real limit, not the 400 lbs on the carrier itself.

Charge Carrier Overview

Specifications

Weight	22 lbs
Weight Capacity	400 lbs
Material	Steel
Receiver Size	2 inch
Hitch Class	III, IV, V (Class II depends on bike and vehicle tongue weight rating)
Shipping Weight	32 lbs
Shipping Dimensions	24" x 18" x 4"
Country of Origin	United States

What's Included

• Charge Carrier
• 3 adjustable mounting brackets (1 flat, 2 leveling)
• All required mounting hardware
• 2 inch steel hitch pin with clip
• 3.5 ft ratchet strap

Fitment & Compatibility

The Charge Carrier is plug-and-play compatible with Sur Ron, Talaria, E-Ride Pro, and dozens of other electric dirt bike and e-moto platforms. It's compatible with additional e-motos that share similar foot peg and frame geometry, even if not listed below. Contact us to confirm fitment for your specific model.

Also confirmed compatible: Beta Explorer Emoto, Malaguti Xam, GoWow Ori, GoWow Alpha, Ariel Rider Grizzly, Land Moto District/Street, Land Moto District/Scrambler, Tuttio, VSETT 8, NAVEE V50, Stomp EBOX 1.6/2.0/3.0/Dragster, Mototec 1000w/1500w/1600w Pro, Funbikes MXR 1300w/1500w, Tork Pro Sport Electric Dirt Bike, Bonnell 805, Yozoma In 10, Beachman '64.

Velocity Volts Charge Carrier: Frequently Asked Questions

Fitment, weight capacity, and setup before you buy.

Q: Does this carrier fit my bike?

A: It's plug-and-play for Sur Ron, Talaria, E-Ride Pro, 79Bike, Rawrr, Altis, and dozens of other e-moto platforms, see the full fitment list above. 20 adjustable bracket positions and adjustable carrier height cover most bikes not explicitly listed, since they're built around similar foot peg and frame geometry.

Q: How much weight can it handle?

A: 400 lbs capacity from a steel frame that weighs just 22 lbs unloaded. That's enough headroom for the heaviest e-motos on the market with margin to spare.

Q: What size hitch receiver do I need?

A: A 2 inch receiver rated Class III, IV, or V. Class II can work depending on your specific vehicle's tongue weight rating, check your owner's manual before ordering if you're on a Class II hitch.

Q: Can one person install and load it?

A: Yes. At 22 lbs, one rider can mount the carrier and load a bike solo in minutes. No drilling and no extra brackets required for supported platforms.

Q: Does it stay secure at highway speed?

A: The Secure Anchor Bolt System locks through your bike's foot pegs rather than relying on wheel straps alone, which is what most generic motorcycle carriers use. Riders have run it at highway speeds and over rough 4x4 roads without the bike shifting.

Q: Can I leave it installed between rides?

A: Yes. Smart Storage Mode folds the carrier vertically against your hitch so it can stay mounted between rides. When you want it off the vehicle entirely, it splits into two pieces with no tools needed for easier storage.

Q: Can it carry two bikes?

A: Yes, with the Charge Carrier Add-On. It expands a single carrier into a double without replacing the base unit you already own.

Q: How long is shipping?

A: Orders ship in 1-2 weeks. Shipping weight is 32 lbs in a 24" x 18" x 4" box.

Q: What's the warranty?

A: Lifetime warranty, engineered and manufactured in Arizona.

Q: How does it compare to a standard motorcycle hitch rack?

A: Standard motorcycle carriers are built around wheel chocks and straps sized for full-weight gas bikes. The Charge Carrier anchors through the foot pegs specifically, which is a mounting point e-motos actually have in the right place, so loading is faster and the hold is more stable for this bike category specifically.

Q: Does it come with a lock?

A: It ships with a 2 inch steel hitch pin and clip, not a keyed lock. If theft deterrence at trailheads matters to you, a locking hitch pin (sold separately, widely available) closes that gap.